FN Pen 2.0 Eraser Replacement
Time to fix your mistakes with a new eraser. Here's your step-by-step guide:
FN Pen 2.0 rubber erasers are replaceable, and readily available from any #2 pencil, or you can get them from our store.
Space was extremely limited when we added the magnet to the cap - we made no compromises when it came to sticking with the "pencil" appearance. That being said, replacing the rubber part of the eraser cap will require some handiness due to a shortened seating depth.
Here's what you'll need:
- A dab of super glue
- 1/4" drill bit
Step 1: Clear the eraser well. Using light hand pressure, twist (clockwise) the 1/4" drill bit into the eraser well to clear any remaining rubber debris. Do not push the bit too hard.
Step 2: Apply a small drop of super glue into the well.
Step 3: Insert the replacement eraser into the eraser well and clean any excess glue if needed.
Step 4: Allow approximately 20 minutes for the glue to dry before using.
And you're done! Your FN Pen 2.0 is now field ready again! Eraser cap replacements are also available within our store.
